Black L Rubber Coupling, L Rubber Spider, Red L PU Coupling, L PU Spider 90-98 Shore a

Black L Rubber Coupling, L Rubber Spider, Red L PU Coupling, L PU Spider 90-98 Shore a

Black L Rubber Coupling, L Rubber Spider, Red L PU Coupling, L PU Spider 90-ninety eight Shore A
 

Description: the polyurethane elastomeric is a new material of polymer synthetic amongst rubber and plastic. It has each high toughness of plastic and higher elasticity of rubber. Its characteristics are: 1, a vast range of hardness. It even now has rubber elongation and resilience at substantial hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. higher strength. At rubber hardness, the tensile strength, tear strength and load carrying capability are significantly higher than general rubber material. At large hardness, its effect energy and flexural strength are a lot larger than plastic substance. 3, use-resistant. Its use resistance is very exceptional, usually in the variety of .01-.10cmthree/1.61km, about three-five times than rubber material. 4, oil resistant. The polyurethane elastomeric is a very polar polymer compound which has lower affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. five, excellent resistance to oxygen and ozone. six, exceptional vibration absorption performance, can do damping and buffering. In the mould production industry, it replaces rubber and springs.7, has good reduced temperature efficiency. eight, radiation resistance. Polyurethane is highly resistant to high strength radiation and has satisfactory overall performance at ten-ten deg radiation dose. nine, with excellent machining overall performance.

 

The polyurethane coupling, rubber coupling are made by injection with high high quality TPU content or mould CSM/SBR. It is developing and special for all sorts of steel shaft coupling with quite good functionality of high tensile energy, substantial use resistant, substantial elastic resilience, water resistant, oil resistant and superb exhaustion resilience, high effect resistant and so on. We have complete sets injection moulds and provide total variety of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J series couplings and so on. with high good quality and exceptional encounter. Implement to all kinds of industrial steel shaft coupling.

 

Technical specs:

materials: TPU, CSM/SBR, NBR, nylon and so on.

colour: yellow, crimson, purple, eco-friendly, black, beige and so on.

surface: smooth

tensile energy: eight-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: one.25g/cm3

elasticity affect: >25%

tear power: 35-155KN/m

akron abrasion loss:<0.05cm3/1.61km

compression set (22h*70°C):<10%

doing work temperature: 120°C

standard size for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080

MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

 

regular measurement for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-ten, NOR-MEX214-10, NOR-MEX240-ten, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Equipment 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #one, #2, #3, #4, #five, #six, #8

GR42, GR48, GR55, GR65, GR75

 

standard dimension for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM & CZPT measurement are agreed

particular supply all sorts of steel coupling for FCL, NM, MH, HRC, Adore Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls affirm type, measurement quantity and amount***

 

Black L Rubber Coupling, L Rubber Spider, Red L PU Coupling, L PU Spider 90-98 Shore a