PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider

PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider

PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider (3A2006)
 

Description: the polyurethane elastomeric is a new material of polymer synthetic amongst rubber and plastic. It has equally substantial power of plastic and higher elasticity of rubber. Its traits are: 1, a wide range of hardness. It even now has rubber elongation and resilience at substantial hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. large energy. At rubber hardness, the tensile toughness, tear strength and load carrying capability are significantly larger than basic rubber substance. At large hardness, its impact strength and flexural energy are a lot higher than plastic materials. three, use-resistant. Its put on resistance is really exceptional, generally in the variety of .01-.10cmthree/1.61km, about three-5 instances than rubber materials. four, oil resistant. The polyurethane elastomeric is a hugely polar polymer compound which has low affinity with non-polar mineral oil and is barely eroded in gas oil and mechanical oil. five, excellent resistance to oxygen and ozone. 6, outstanding vibration absorption performance, can do damping and buffering. In the mildew production market, it replaces rubber and springs.seven, has great reduced temperature performance. eight, radiation resistance. Polyurethane is extremely resistant to large vitality radiation and has satisfactory overall performance at ten-ten deg radiation dose. 9, with good machining overall performance.

 

The polyurethane coupling, rubber coupling are made by injection with large top quality TPU substance or mould CSM/SBR. It is planning and specific for all varieties of steel shaft coupling with really very good functionality of large tensile energy, substantial dress in resistant, substantial elastic resilience, water resistant, oil resistant and outstanding tiredness resilience, high effect resistant and so forth. We have complete sets injection moulds and source entire variety of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Gear J collection couplings and so forth. with higher good quality and outstanding experience. Use to all sorts of industrial metallic shaft coupling.

 

Specifications:

content: TPU, CSM/SBR, NBR, nylon etc.

shade: yellow, pink, purple, environmentally friendly, black, beige and so on.

surface: easy

tensile strength: 8-55Mpa

hardness: 70-98Shore A

elongation: four hundred%-650%

density: 1.25g/cmthree

elasticity affect: >25%

tear toughness: 35-155KN/m

akron abrasion loss:<0.05cm3/1.61km

compression set (22h*70°C):<10%

doing work temperature: 120°C

normal size for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/100, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080

MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

 

normal dimension for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-ten, NOR-MEX214-ten, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #one, #two, #three, #four, #5, #6, #8

GR42, GR48, GR55, GR65, GR75

 

regular dimensions for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM & CZPT measurement are agreed

unique offer all varieties of metal coupling for FCL, NM, MH, HRC, Enjoy Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls verify sort, dimension number and quantity***

 

PU Coupling, PU Spider, Polyurethane Coupling, Polyurethane Spider