Rex Omega Coupling, Spider, Element Made with TPU and Steel Material

Rex Omega Coupling, Spider, Element Made with TPU and Steel Material

Rex Omega Coupling, Spider, Factor Made with TPU and Steel Content (3A2006)

 

Description: the polyurethane elastomeric is a new substance of polymer synthetic between rubber and plastic. It has each high power of plastic and high elasticity of rubber. Its traits are: 1, a wide assortment of hardness. It nonetheless has rubber elongation and resilience at higher hardness. The polyurethane elastomeric has a hardness assortment of Shore A10-D80. two. substantial energy. At rubber hardness, the tensile strength, tear power and load carrying capability are significantly higher than basic rubber materials. At higher hardness, its influence strength and flexural power are much greater than plastic content. 3, dress in-resistant. Its put on resistance is extremely exceptional, normally in the range of .01-.10cmthree/one.61km, about three-5 occasions than rubber content. four, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has lower affinity with non-polar mineral oil and is rarely eroded in gasoline oil and mechanical oil. five, very good resistance to oxygen and ozone. six, superb vibration absorption functionality, can do damping and buffering. In the mould production market, it replaces rubber and springs.seven, has great low temperature functionality. eight, radiation resistance. Polyurethane is hugely resistant to higher vitality radiation and has satisfactory functionality at ten-ten deg radiation dose. 9, with good machining overall performance.

 

The polyurethane coupling, rubber coupling are created by injection with higher top quality TPU materials or mould CSM/SBR. It is creating and specific for all types of metallic shaft coupling with really good overall performance of high tensile power, substantial use resistant, large elastic resilience, h2o resistant, oil resistant and superb exhaustion resilience, substantial effect resistant etc. We have full sets injection moulds and offer entire range of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J series couplings and so on. with higher quality and exceptional expertise. Implement to all types of industrial metallic shaft coupling.

 

Technical specs:

materials: TPU, CSM/SBR, NBR, nylon and many others.

colour: yellow, pink, purple, eco-friendly, black, beige etc.

surface: easy

tensile toughness: eight-55Mpa

hardness: 70-98Shore A

elongation: four hundred%-650%

density: 1.25g/cm3

elasticity influence: >25%

tear strength: 35-155KN/m

akron abrasion decline:<0.05cm3/one.61km

compression established (22h*70°C):<10%

operating temperature: 120°C

regular measurement for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS5, GS7, GS9, GS12, GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS550, GS65, GS75

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/95, L99/one hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080

MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

 

common size for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/one hundred, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-ten, NOR-MEX194-10, NOR-MEX214-10, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #two, #3, #four, #5, #six, #8

GR42, GR48, GR55, GR65, GR75

DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11

 

normal measurement for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in baggage, cartons, pallets or crates

OEM & CZPT dimension are agreed

specific supply all varieties of steel coupling for FCL, NM, MH, HRC, Really like Joy, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls validate type, dimension quantity and quantity***

Rex Omega Coupling, Spider, Element Made with TPU and Steel Material