Black L Rubber Coupling, L Rubber Spider, Purple L PU Coupling, L PU Spider (3A2006)
 

Description: the polyurethane elastomeric is a new materials of polymer synthetic among rubber and plastic. It has the two substantial energy of plastic and large elasticity of rubber. Its attributes are: 1, a wide selection of hardness. It even now has rubber elongation and resilience at higher hardness. The polyurethane elastomeric has a hardness variety of Shore A10-D80. 2. large energy. At rubber hardness, the tensile toughness, tear strength and load carrying ability are considerably greater than general rubber material. At high hardness, its influence energy and flexural strength are considerably larger than plastic substance. three, put on-resistant. Its wear resistance is extremely fantastic, usually in the range of .01-.10cm^three/one.61km, about three-five occasions than rubber materials. four, oil resistant. The polyurethane elastomeric is a extremely polar polymer compound which has low affinity with non-polar mineral oil and is rarely eroded in gasoline oil and mechanical oil. 5, excellent resistance to oxygen and ozone. six, superb vibration absorption overall performance, can do damping and buffering. In the mould production industry, it replaces rubber and springs.7, has very good low temperature efficiency. eight, radiation resistance. Polyurethane is very resistant to substantial power radiation and has satisfactory performance at ten-ten deg radiation dose. 9, with good machining performance.

 

The polyurethane coupling, rubber coupling are produced by injection with large high quality TPU substance or mould CSM/SBR. It is designing and special for all sorts of metal shaft coupling with quite excellent functionality of large tensile toughness, higher dress in resistant, higher elastic resilience, water resistant, oil resistant and superb fatigue resilience, high affect resistant etc. We have full sets injection moulds and offer full assortment of GR, GS, MT, ML, MH, Hb, HRC, L, T, NM and Equipment J series couplings and so on. with high top quality and exceptional knowledge. Apply to all kinds of industrial steel shaft coupling.

 

Specs:

content: TPU, CSM/SBR, NBR, nylon etc.

shade: yellow, pink, purple, environmentally friendly, black, beige and so on.

area: sleek

tensile toughness: 8-55Mpa

hardness: 70-98Shore A

elongation: 400%-650%

density: one.25g/cm³

elasticity influence: >25%

tear energy: 35-155KN/m

akron abrasion loss:<0.05cm^three/1.61km

compression set (22h*70°C):<10%

operating temperature: 120°C

normal dimension for polyurethane coupling: 

GR14, GR19, GR24, GR28, GR38, GR42, GR48, GR55, GR65, GR75, GR90, GR100, GR110, GR125, GR140, GR160, GR180

GS14, GS19, GS24, GS28, GS38, GS42, GS48, GS55, GS65, GS75, GS90, GS100, GS110, GS125, GS140, GS160, GS180

MT1, MT2, MT3, MT4, MT5, MT6, MT7, MT8, MT9, MT10, MT11, MT12, MT13

ML1, ML2, ML3, ML4, ML5, ML6, ML7, ML8, ML9, ML10, ML11, ML12, ML13

MH45, MH55, MH65, MH80, MH90, MH115, MH130, MH145, MH175, MH200

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/a hundred, L110, L150, L190, L225, L276

FALK-R 10R, 20R, 30R, 40R, 50R, 60R, 70R, 80R

SBT T40, T45, T50, T55, T60, T65, T70, T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T185, T190, T210

Joong Ang CR0050, 0070, 571, 571, 2035, 2035A, 3545, 4560, 6070, 7080

MS571, MS571, MS1119, MS1424, MS1928, MS1938, MS2845, MS3860, MS4275, MS6510

D14, D14L, D20, D25, D30, D30L, D35, D40, D45, D49, D55, D65

5H, 6H, 7H, 8H, 9H, 10H, 11H

 

normal dimension for rubber coupling:

Hb80, Hb95, Hb110, Hb125, Hb140, Hb160, Hb180, Hb200, Hb240, Hb280, Hb315

HRC70, HRC90, HRC110, HRC130, HRC150, HRC180, HRC230, HRC280

L35, L50, L70, L75, L90/ninety five, L99/100, L110, L150, L190, L225

NM50, NM67, NM82, NM97, NM112, NM128, NM148, NM168, NM194, NM214, NM240, NM265

NOR-MEX168-10, NOR-MEX194-10, NOR-MEX214-ten, NOR-MEX240-10, NOR-MEX265-10

FCL1#, FCL2#, FCL3#, FCL4#, FCL5#, FCL6#, FCL7#, FCL8#

FCL90, FCL100, FCL112, FCL125, FCL140, FCL160, FCL180, FCL200, FCL224, FCL250, FCL280, FCL315, FCL335, FCL400, FCL450, FCL560, FCL630

Gear 3J, 4J, 5J, 6J, 7J, 8J, 9J, 10J, 11J, 12J, 13J, 14J

Hytre 4H, 5H, 6H, 7H, 8H, 9H, 11H

Tyre F40, F50, F60, F70, F80, F90, F100, F110, F120, F140, F160 

SBT T75, T80, T85, T90, T95, T100, T105, T108, T110, T115, T120, T125, T130, T135, T140, T145, T150, T154, T170, T210

FCLpin #1, #2, #three, #four, #five, #six, #eight

GR42, GR48, GR55, GR65, GR75

 

standard dimensions for nylon coupling:

NL1, NL2, NL3, NL4, NL5, NL6, NL7, NL8, NL9, NL10

M28, M32, M38, M42, M48, M58, M65

packing in cartons

OEM & CZPT measurement are agreed

specific offer all varieties of metal coupling for FCL, NM, MH, HRC, Adore Pleasure, Joongang, Centafelx, XL-GR, Tyre

***when you enquiry, pls affirm kind, measurement quantity and amount***