LX Variety Elastic Pin Coupling (GB/T5014-2003)
LX Elastic pin coupling is manufactured of numerous non-metallic elastic pins and two 50 percent couplings. The coupling is related by lacing these elastic pins into holes of two half couplings, and as a result the torque is transferred.
LX Elastic pin coupling can compensate the relative offset of two axes to a particular extent. Elastic elements are sheared for the duration of procedure and are normally relevant to the working situations of medium speed transmission shafts with minimal needs. Allowable operating temperature setting temperature is -20ºC~+70ºC, the nominal transfer torque is 250~180000N.m.
♦LX Elastic Pin Coupling Simple Parameter And Major Dimension(GB/T5014-2003)
Kind | Nominal torque N·m |
Speed rpm |
Shaft hole(mm) done,dtwo,dz |
Duration of shaft hole(mm) | D | B | Minimal compensation | Rotary inertia Kg·mtwo |
Mass Kg |
||||
Y type | J,J1,Z variety | Axial | Radial | Angle | |||||||||
L | L1 | L | mm | ||||||||||
LX1 | 250 | 8500 | 12,fourteen | 32 | 27 | 32 | 90 | two.five | +.5 | .fifteen | ≤0°30´ |
.0064 | 2 |
16,18,19 | forty two | 30 | forty two | ||||||||||
twenty,22,24 | fifty two | 38 | fifty two | ||||||||||
LX2 | 560 | 6300 | twenty,22,24 | fifty two | 38 | fifty two | one hundred twenty | 2.5 | +one | .fifteen | ≤0°30´ | .253 | five |
25,28 | sixty two | forty four | 62 | ||||||||||
thirty,32,35 | 82 | sixty | eighty two | ||||||||||
LX3 | 1250 | 4750 | 30,32,35,38 | eighty two | 60 | 82 | one hundred sixty | two.5 | +1 | .fifteen | ≤0°30´ | .six | eight |
40,forty two,45,48 | 112 | eighty four | 112 | ||||||||||
LX4 | 2500 | 3870 | 40,45,45,48,fifty, 55,fifty six |
112 | 84 | 112 | 195 | three | +1.five | .15 | ≤0°30´ | three.4 | 22 |
60,sixty three | 142 | 107 | 142 | ||||||||||
LX5 | 3150 | 3450 | fifty,55,56 | 142 | 107 | 142 | 220 | 3 | +1.5 | .15 | ≤0°30´ | 5.4 | thirty |
sixty,sixty three,sixty five,70,seventy one, 75 |
142 | 107 | 142 | ||||||||||
LX6 | 6300 | 2720 | 60,63,65,70,71, 75,eighty |
142 | 107 | 142 | 280 | 4 | +two | .20 | ≤0°30´ | fifteen.6 | 53 |
85 | 172 | 132 | 172 | ||||||||||
LX7 | 11200 | 2360 | 70,seventy one,75 | 142 | 107 | 142 | 320 | 4 | +two | .20 | ≤0°30´ | forty one.one | 98 |
eighty,eighty five,90,ninety five | 172 | 132 | 172 | ||||||||||
100,a hundred and ten | 212 | 167 | 212 | ||||||||||
LX8 | 16000 | 2120 | 80,85,ninety,ninety five | 212 | 167 | 212 | 360 | 5 | +two | .20 | ≤0°30´ | 56.six | 119 |
one hundred,a hundred and ten,120,one hundred twenty five | 212 | 167 | 212 | ||||||||||
LX9 | 22400 | 1850 | one hundred,a hundred and ten,a hundred and twenty,a hundred twenty five | 212 | 167 | 212 | 410 | 5 | +two | .twenty | ≤0°30´ | 133.three | 197 |
a hundred thirty,one hundred forty | 252 | 202 | 252 | ||||||||||
LX10 | 35500 | 1600 | a hundred and ten,a hundred and twenty,125 | 212 | 167 | 212 | 480 | six | +2.five | .twenty five | ≤0°30´ | 273.two | 322 |
a hundred thirty,140,one hundred fifty | 252 | 202 | 252 | ||||||||||
a hundred and sixty,a hundred and seventy,a hundred and eighty | 302 | 202 | 252 | ||||||||||
LX11 | 50000 | 1400 | 130,one hundred forty,a hundred and fifty | 252 | 202 | 252 | 540 | six | +two.5 | .25 | ≤0°30´ | 555.7 | 520 |
one hundred sixty,a hundred and seventy,a hundred and eighty | 302 | 242 | 302 | ||||||||||
a hundred ninety,200,220 | 352 | 282 | 352 | ||||||||||
LX12 | 80000 | 1220 | one hundred sixty,170,one hundred eighty | 302 | 242 | 302 | 630 | seven | +2.5 | .twenty five | ≤0°30´ | 902 | 714 |
190,200,220 | 352 | 282 | 352 | ||||||||||
240,250,260 | 410 | 330 | – | ||||||||||
LX13 | 125000 | 1080 | one hundred ninety,200,220 | 352 | 282 | 352 | 710 | eight | +3 | .twenty five | ≤0°30´ | 1700 | 1057 |
240,250,260 | 410 | 330 | – | ||||||||||
280,300 | 470 | 380 | – | ||||||||||
LX14 | 180000 | 950 | 240,250,260 | 410 | 330 | – | 800 | eight | +3 | .twenty five | ≤0°30´ | 4318 | 1956 |
280,three hundred,320 | 470 | 380 | – | ||||||||||
340 | 550 | 450 | – |
Note:Coupling weights and rotary inertia in the sheet are calculated in accordance to the minimal diameter of the shaft hole and the combination of J/Y shaft gap.
♦Item Display
♦Other Items Listing
Transmission CZPT Areas Title |
Design |
CZPT Coupling | WS,WSD,WSP |
Cardan Shaft | SWC,SWP,SWZ |
Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
High Versatile Coupling | LM |
Chain Coupling | GL |
Jaw Coupling | LT |
Grid Coupling | JS |
♦Our Firm
Our company supplies distinct sorts of items. Higher good quality and reasonable value. We adhere to the basic principle of “good quality 1st, services very first, ongoing enhancement and innovation to meet the consumers” for the administration and “zero defect, zero issues” as the good quality objective. To excellent our support, we give the products with very good high quality at the sensible price.
Welcome to customize products from our factory and remember to provide your design drawings or get in touch with us if you need other requirements.
♦Our Solutions
one.Design and style Companies
Our design and style staff has knowledge in cardan shaft relating to solution design and development. If you have any wants for your new item or would like to make further enhancements, we are listed here to offer you our assist.
two.Product Solutions
raw materials → Reducing → Forging →Rough machining →Shot blasting →Heat remedy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Procedure
We could create the sample in accordance to your necessity and amend the sample consistently to meet your want.
4.Investigation & CZPT
We usually investigation the new wants of the market and develop the new design when there is new autos in the market.
five.Top quality Control
CZPTy phase must be specific check by Professional Employees according to the normal of CZPT and TS16949.
♦FAQ
Q 1: Are you buying and selling business or producer?
A: We are a professional producer specializing in producing
numerous sequence of couplings.
Q 2:Can you do OEM?
Indeed, we can. We can do OEM & ODM for all the customers with CZPT artworks of PDF or AI structure.
Q 3:How prolonged is your delivery time?
CZPTly it is twenty-thirty times if the items are not in stock. It is in accordance to amount.
Q 4: Do you give samples ? Is it free of charge or extra ?
Sure, we could provide the sample but not for cost-free.Really we have a extremely excellent cost basic principle, when you make the bulk purchase then value of sample will be deducted.
Q 5: How prolonged is your warranty?
A: Our Warranty is twelve thirty day period below typical circumstance.
Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.
Q 7: Do you have inspection techniques for coupling ?
A:a hundred% self-inspection prior to packing.
Q 8: Can I have a visit to your factory before the buy?
A: Positive,welcome to check out our manufacturing facility.
Q nine: What is your payment?
A:one) T/T. two) L/C