LT Variety Coupling With Elastic Sleeve And Pin(GB/T4323-2002)
Application:
one.LT variety shaft coupling with elastic sleeve and pin are widely employed in different mechanical and hydraulic fields, can adapt good and unfavorable changeful start frequent instances.
2.Printing machinery / Packing machinery / Wooden-operating machinery etc large-scale mechanical tools.
Design and style attribute:
one.Simply because of elastic sleeve distortion and the teeth clearance between ring holes of 50 percent-coupling,the coupling has some compensatory of relativity shir and isolation houses.
two.Working temperature is -20ºC~+70ºC.
3.The marking strategy of Keyway varieties and shaft holes dimensions should be in accord with GB/T3852-1997.
Fundamental Parameter And Primary Dimension(GB/T4323-2002)
| Sort | Nominal torque N·m |
Speed rpm |
Bore diameter (mm) d1,d2,dz |
Length of bore(mm) | D | A | S | Restricted payment | Mass kg |
Rotary Inertia kg·m2 |
|||||
| Y Kind | J,J1,Z Type | Radial mm |
Angle | ||||||||||||
| Iron | Steel | Iron | Metal | L | L1 | L | mm | ||||||||
| LT1 | six.three | 6600 | 8800 | nine | 9 | 20 | 14 | seventy one | 18 | 3 | .2 | 1°30´ | .eighty two | .0005 | |
| 10,11 | ten,eleven | 25 | seventeen | ||||||||||||
| 12 | twelve,14 | 32 | 20 | ||||||||||||
| LT2 | sixteen | 5500 | 7600 | 12,14 | twelve,fourteen | 32 | 20 | 80 | eighteen | 3 | .two | 1°30´ | 1.twenty | .0008 | |
| sixteen | 16,eighteen,19 | forty two | thirty | 42 | |||||||||||
| LT3 | 31.5 | 4700 | 6300 | sixteen,18,19 | sixteen,eighteen,19 | 42 | 30 | 42 | ninety five | 35 | four | .2 | 1°30´ | two.twenty | .571 |
| 20 | 20,22 | 52 | 38 | fifty two | |||||||||||
| LT4 | 63 | 4200 | 5700 | 20,22,24 | twenty,22,24 | fifty two | 38 | 52 | 106 | 35 | 4 | .two | 1°30´ | two.84 | .0037 |
| – | twenty five,28 | 62 | 44 | sixty two | |||||||||||
| LT5 | 125 | 3600 | 4600 | twenty five,28 | 25,28 | 62 | forty four | sixty two | 130 | forty five | 5 | .three | 1°30´ | six.05 | .012 |
| thirty,32 | thirty,32,35 | eighty two | 60 | 82 | |||||||||||
| LT6 | 250 | 3300 | 3800 | thirty,35,38 | 32,35,38 | 82 | 60 | eighty two | a hundred and sixty | forty five | five | .3 | 1°00´ | 9.fifty seven | .571 |
| 40 | 40,42 | 112 | 84 | 112 | |||||||||||
| LT7 | five hundred | 2800 | 3600 | 40,forty two,forty five | 40,42,45,forty eight | 112 | 84 | 112 | one hundred ninety | forty five | five | .three | 1°00´ | 14.01 | .055 |
| LT8 | 710 | 2400 | 3000 | forty five,48,50,55 | 45,48,fifty,55,56 | 112 | eighty four | 112 | 224 | 65 | six | .4 | 1°00´ | 23.12 | .1340 |
| – | sixty,sixty three | 142 | 107 | 142 | |||||||||||
| LT9 | 1000 | 2100 | 2850 | 50,fifty five,56 | 50,fifty five,fifty six | 112 | 84 | 112 | 250 | 65 | 6 | .4 | 1°00´ | thirty.69 | .2130 |
| 60,63 | sixty,63,sixty five,70,71 | 142 | 108 | 142 | |||||||||||
| LT10 | 2000 | 1700 | 2300 | 63,65,70,71,seventy five | 63,65,70,71,75 | 142 | 108 | 142 | 315 | eighty | eight | .4 | 1°00´ | 61.forty | .660 |
| eighty,85 | eighty,eighty five,ninety,95 | 172 | 132 | 172 | |||||||||||
| LT11 | 4000 | 1350 | 1800 | 80,85,90,ninety five | 80,eighty five,90,ninety five | 172 | 132 | 172 | four hundred | one hundred | ten | .5 | 0°00´ | one hundred twenty.70 | two.122 |
| 100,a hundred and ten | one hundred,110 | 212 | 167 | 212 | |||||||||||
| LT12 | 8000 | 1100 | 1450 | 100,110,a hundred and twenty,a hundred twenty five | a hundred,110,one hundred twenty,125 | 212 | 167 | 212 | 475 | one hundred thirty | 12 | .5 | 0°00´ 0°00´ |
210.34 | five.39 |
| – | thirteen | 252 | 202 | 252 | |||||||||||
| LT13 | 16000 | 800 | 1150 | a hundred and twenty,one hundred twenty five | 120,one hundred twenty five | 212 | 167 | 212 | 600 | 180 | fourteen | .6 | 0°00´ | 419.36 | eleven.fifty eight |
| 130,140,a hundred and fifty | one hundred thirty,140,a hundred and fifty | 252 | 202 | 252 | |||||||||||
| a hundred and sixty | one hundred sixty,170 | 302 | 242 | 302 | |||||||||||
Observe:
1.Coupling weights in the sheet are calculated according to the bare minimum diameter and maximum duration of the shaft gap.
two.Quick overloading can not exceed 2 occasions rated typical torque.
3.Variety of shaft holes, the lengths of L and L1 also can be created as consumer demands.
4.Rotational inertia are comparable value.
Item Show
♦Other Products List
| Transmission CZPT Elements Title |
Design |
| CZPT Coupling | WS,WSD,WSP |
| Cardan Shaft | SWC,SWP,SWZ |
| Tooth Coupling | CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK |
| Disc Coupling | JMI,JMIJ,JMII,JMIIJ |
| Higher Versatile Coupling | LM |
| Chain Coupling | GL |
| Jaw Coupling | LT |
| Grid Coupling | JS |
♦Our Firm
Our firm supplies diverse kinds of goods. Higher good quality and reasonable price tag. We adhere to the basic principle of “high quality 1st, support 1st, ongoing improvement and innovation to meet the consumers” for the administration and “zero defect, zero problems” as the high quality goal. To ideal our service, we give the products with good quality at the reasonable price tag.
Welcome to customise items from our manufacturing unit and remember to offer your design drawings or speak to us if you need other requirements.
♦Our Providers
1.Style Companies
Our design and style group has experience in cardan shaft relating to merchandise design and improvement. If you have any needs for your new merchandise or desire to make more enhancements, we are here to supply our help.
2.Product Providers
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could build the sample according to your need and amend the sample continually to fulfill your need.
4.Study & CZPT
We typically investigation the new needs of the market and develop the new design when there is new vehicles in the marketplace.
five.Good quality Handle
CZPTy stage ought to be special check by Expert Personnel in accordance to the regular of CZPT and TS16949.
♦FAQ
Q 1: Are you buying and selling company or producer?
A: We are a expert manufacturer specializing in production
numerous collection of couplings.
Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the customers with CZPT artworks of PDF or AI format.
Q 3:How prolonged is your supply time?
CZPTly it is 20-30 times if the goods are not in stock. It is according to amount.
Q 4: Do you supply samples ? Is it free or extra ?
Yes, we could supply the sample but not for free.Truly we have a very excellent price tag principle, when you make the bulk order then price of sample will be deducted.
Q 5: How long is your warranty?
A: Our Warranty is twelve thirty day period underneath regular circumstance.
Q 6: What is the MOQ?
A:Normally our MOQ is 1pcs.
Q 7: Do you have inspection processes for coupling ?
A:100% self-inspection prior to packing.
Q 8: Can I have a check out to your factory ahead of the purchase?
A: Certain,welcome to pay a visit to our manufacturing unit.
Q nine: What is actually your payment?
A:one) T/T. 2) L/C
♦Make contact with Us
Internet: huadingcoupling.en.made-in-china.com
Add: No.1 HangCZPT Street,Chengnan park,HangCZPT CZPT,ZheCZPT Province,China
